Fit Testing

Sean Smith Leave a Comment

  • September 23, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

Sean Smith Leave a Comment

  • September 24, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

Sean Smith Leave a Comment

  • September 25, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

Sean Smith Leave a Comment

  • September 26, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

Sean Smith Leave a Comment

  • September 29, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

Sean Smith Leave a Comment

  • September 30, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

Sean Smith Leave a Comment

  • October 1, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

Sean Smith Leave a Comment

  • October 2, 2014
    10:00 am - 11:00 am

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

Sean Smith Leave a Comment

  • October 3, 2014
    10:00 am - 11:00 am

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

Sean Smith Leave a Comment

  • October 6, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

Sean Smith Leave a Comment

  • October 7, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

Sean Smith Leave a Comment

  • October 8, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

Sean Smith Leave a Comment

  • October 9, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

Sean Smith Leave a Comment

  • October 13, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

Sean Smith Leave a Comment

  • January 1, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

Sean Smith Leave a Comment

  • February 10, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

Sean Smith Leave a Comment

  • February 11, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

Sean Smith Leave a Comment

  • February 12, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

Sean Smith Leave a Comment

  • March 18, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

Sean Smith Leave a Comment

  • May 19, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

Sean Smith Leave a Comment

  • July 1, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

Sean Smith Leave a Comment

  • August 4, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

Sean Smith Leave a Comment

  • September 1, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

Sean Smith Leave a Comment

  • September 17, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

Sean Smith Leave a Comment

  • September 18, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

Sean Smith Leave a Comment

  • September 19, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

Sean Smith Leave a Comment

  • September 22, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • September 19, 2014
    1:00 pm - 2:00 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

There are no upcoming dates for this event.


Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • March 18, 2014
    1:00 pm - 1:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • February 28, 2014
    3:00 pm - 4:00 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

Duration
30 min

Cost
$50

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • September 7, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • September 13, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • September 14, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • October 11, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • October 12, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • October 18, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • October 19, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • October 25, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • October 26, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • November 1, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • November 2, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • November 8, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • November 9, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • November 15, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • November 16, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • November 22, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • November 23, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • November 29, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • November 30, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • December 6, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • December 7, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • December 13, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • December 14, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • December 20, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • December 21, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • December 27, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • December 28, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • March 16, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • March 22, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • March 23, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • March 29, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • March 30, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • May 3, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • May 4, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • May 10, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • May 11, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • May 17, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • May 18, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • May 24, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • May 25, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • May 31, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • June 1, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • June 7, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • June 8, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • June 14, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • June 15, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • June 21, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • June 22, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • June 28, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • June 29, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • July 5, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • July 6, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • July 12, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • July 13, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • July 19, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • July 20, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • July 26, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • July 27, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • August 2, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • August 3, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • August 9, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • August 10, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • August 16, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • August 17, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • August 23, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • August 24, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • August 30, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • August 31, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • September 6, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • January 4, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • January 5, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • January 11, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • January 12, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • January 18, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • January 19, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • January 25, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • January 26, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • February 1, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • February 2, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • February 8, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • February 9, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • February 15, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • February 16, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • February 22, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • February 23, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • March 1, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

Fit Testing

admin Leave a Comment

  • March 2, 2014
    8:30 am - 4:30 pm

Respiratory protection devices must fit properly in order to provide optimal protection. If fit testing is not completed prior to using a respirator, you may not be able to achieve a proper seal and you risk being exposed to harmful substances. A professional fit test ensures that you have the correct size of a specific make or model of respirator, and that there is no leakage in the mask so you can be confident of your safety.

This process is required for both positive and negative pressure devices, is mandatory every two years, and is recommended annually.

Course Content

  • Review of legislation (rules and regulations)
  • Pre-donning safety checks
  • Complete instruction on how to properly don and doff a respirator
  • Proper cleaning and storage of respirators

ALL WEEKEND COURSES ARE BY GROUP REGISTRATION ONLY

Duration
30 min

Cost
$65

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3