OSSA Fall Protection

admin Leave a Comment

  • July 24, 2014
    8:00 am - 4:30 pm

Our fall protection course covers all the information required to receive a three year fall protection certification. This course is a blend of theoretical  and practical hands on training.  Participants learn about the  different pieces of equipment that make up a fall protection system, as well as the rules regarding when fall protection systems are required, what type to use, and how to avoid potential hazards. Students also learn how to do a proper fall calculation and figure out minimum clearances requirements to work safely from heights.

Course content:

  • Review of legislation (rules and regulations)
  • How to read and create a fall protection plan
  • Fall hazard identification, elimination and control
  • Identifying the types of anchor points and their proper set-up
  • Different connectors and how to use them
  • How to select, don, and doff a fall protection harness
  • Pre-use equipment inspections
  • Emergency response procedures

Duration
8 hours

Cost
$175.00

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

OSSA Fall Protection

admin Leave a Comment

  • July 31, 2014
    8:00 am - 4:30 pm

Our fall protection course covers all the information required to receive a three year fall protection certification. This course is a blend of theoretical  and practical hands on training.  Participants learn about the  different pieces of equipment that make up a fall protection system, as well as the rules regarding when fall protection systems are required, what type to use, and how to avoid potential hazards. Students also learn how to do a proper fall calculation and figure out minimum clearances requirements to work safely from heights.

Course content:

  • Review of legislation (rules and regulations)
  • How to read and create a fall protection plan
  • Fall hazard identification, elimination and control
  • Identifying the types of anchor points and their proper set-up
  • Different connectors and how to use them
  • How to select, don, and doff a fall protection harness
  • Pre-use equipment inspections
  • Emergency response procedures

Duration
8 hours

Cost
$175.00

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

OSSA Fall Protection

admin Leave a Comment

  • August 7, 2014
    8:00 am - 4:30 pm

Our fall protection course covers all the information required to receive a three year fall protection certification. This course is a blend of theoretical  and practical hands on training.  Participants learn about the  different pieces of equipment that make up a fall protection system, as well as the rules regarding when fall protection systems are required, what type to use, and how to avoid potential hazards. Students also learn how to do a proper fall calculation and figure out minimum clearances requirements to work safely from heights.

Course content:

  • Review of legislation (rules and regulations)
  • How to read and create a fall protection plan
  • Fall hazard identification, elimination and control
  • Identifying the types of anchor points and their proper set-up
  • Different connectors and how to use them
  • How to select, don, and doff a fall protection harness
  • Pre-use equipment inspections
  • Emergency response procedures

Duration
8 hours

Cost
$175.00

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

OSSA Fall Protection

admin Leave a Comment

  • August 14, 2014
    8:00 am - 4:30 pm

Our fall protection course covers all the information required to receive a three year fall protection certification. This course is a blend of theoretical  and practical hands on training.  Participants learn about the  different pieces of equipment that make up a fall protection system, as well as the rules regarding when fall protection systems are required, what type to use, and how to avoid potential hazards. Students also learn how to do a proper fall calculation and figure out minimum clearances requirements to work safely from heights.

Course content:

  • Review of legislation (rules and regulations)
  • How to read and create a fall protection plan
  • Fall hazard identification, elimination and control
  • Identifying the types of anchor points and their proper set-up
  • Different connectors and how to use them
  • How to select, don, and doff a fall protection harness
  • Pre-use equipment inspections
  • Emergency response procedures

Duration
8 hours

Cost
$175.00

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

OSSA Fall Protection

admin Leave a Comment

  • August 21, 2014
    8:00 am - 4:30 pm

Our fall protection course covers all the information required to receive a three year fall protection certification. This course is a blend of theoretical  and practical hands on training.  Participants learn about the  different pieces of equipment that make up a fall protection system, as well as the rules regarding when fall protection systems are required, what type to use, and how to avoid potential hazards. Students also learn how to do a proper fall calculation and figure out minimum clearances requirements to work safely from heights.

Course content:

  • Review of legislation (rules and regulations)
  • How to read and create a fall protection plan
  • Fall hazard identification, elimination and control
  • Identifying the types of anchor points and their proper set-up
  • Different connectors and how to use them
  • How to select, don, and doff a fall protection harness
  • Pre-use equipment inspections
  • Emergency response procedures

Duration
8 hours

Cost
$175.00

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

OSSA Fall Protection

admin Leave a Comment

  • August 28, 2014
    8:00 am - 4:30 pm

Our fall protection course covers all the information required to receive a three year fall protection certification. This course is a blend of theoretical  and practical hands on training.  Participants learn about the  different pieces of equipment that make up a fall protection system, as well as the rules regarding when fall protection systems are required, what type to use, and how to avoid potential hazards. Students also learn how to do a proper fall calculation and figure out minimum clearances requirements to work safely from heights.

Course content:

  • Review of legislation (rules and regulations)
  • How to read and create a fall protection plan
  • Fall hazard identification, elimination and control
  • Identifying the types of anchor points and their proper set-up
  • Different connectors and how to use them
  • How to select, don, and doff a fall protection harness
  • Pre-use equipment inspections
  • Emergency response procedures

Duration
8 hours

Cost
$175.00

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

OSSA Fall Protection

admin Leave a Comment

  • September 4, 2014
    8:00 am - 4:30 pm

Our fall protection course covers all the information required to receive a three year fall protection certification. This course is a blend of theoretical  and practical hands on training.  Participants learn about the  different pieces of equipment that make up a fall protection system, as well as the rules regarding when fall protection systems are required, what type to use, and how to avoid potential hazards. Students also learn how to do a proper fall calculation and figure out minimum clearances requirements to work safely from heights.

Course content:

  • Review of legislation (rules and regulations)
  • How to read and create a fall protection plan
  • Fall hazard identification, elimination and control
  • Identifying the types of anchor points and their proper set-up
  • Different connectors and how to use them
  • How to select, don, and doff a fall protection harness
  • Pre-use equipment inspections
  • Emergency response procedures

Duration
8 hours

Cost
$175.00

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

OSSA Fall Protection

admin Leave a Comment

  • September 11, 2014
    8:00 am - 4:30 pm

Our fall protection course covers all the information required to receive a three year fall protection certification. This course is a blend of theoretical  and practical hands on training.  Participants learn about the  different pieces of equipment that make up a fall protection system, as well as the rules regarding when fall protection systems are required, what type to use, and how to avoid potential hazards. Students also learn how to do a proper fall calculation and figure out minimum clearances requirements to work safely from heights.

Course content:

  • Review of legislation (rules and regulations)
  • How to read and create a fall protection plan
  • Fall hazard identification, elimination and control
  • Identifying the types of anchor points and their proper set-up
  • Different connectors and how to use them
  • How to select, don, and doff a fall protection harness
  • Pre-use equipment inspections
  • Emergency response procedures

Duration
8 hours

Cost
$175.00

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

OSSA Fall Protection

admin Leave a Comment

  • September 18, 2014
    8:00 am - 4:30 pm

Our fall protection course covers all the information required to receive a three year fall protection certification. This course is a blend of theoretical  and practical hands on training.  Participants learn about the  different pieces of equipment that make up a fall protection system, as well as the rules regarding when fall protection systems are required, what type to use, and how to avoid potential hazards. Students also learn how to do a proper fall calculation and figure out minimum clearances requirements to work safely from heights.

Course content:

  • Review of legislation (rules and regulations)
  • How to read and create a fall protection plan
  • Fall hazard identification, elimination and control
  • Identifying the types of anchor points and their proper set-up
  • Different connectors and how to use them
  • How to select, don, and doff a fall protection harness
  • Pre-use equipment inspections
  • Emergency response procedures

Duration
8 hours

Cost
$175.00

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

OSSA Fall Protection

admin Leave a Comment

  • September 25, 2014
    8:00 am - 4:30 pm

Our fall protection course covers all the information required to receive a three year fall protection certification. This course is a blend of theoretical  and practical hands on training.  Participants learn about the  different pieces of equipment that make up a fall protection system, as well as the rules regarding when fall protection systems are required, what type to use, and how to avoid potential hazards. Students also learn how to do a proper fall calculation and figure out minimum clearances requirements to work safely from heights.

Course content:

  • Review of legislation (rules and regulations)
  • How to read and create a fall protection plan
  • Fall hazard identification, elimination and control
  • Identifying the types of anchor points and their proper set-up
  • Different connectors and how to use them
  • How to select, don, and doff a fall protection harness
  • Pre-use equipment inspections
  • Emergency response procedures

Duration
8 hours

Cost
$175.00

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

OSSA Fall Protection

admin Leave a Comment

  • October 2, 2014
    8:00 am - 4:30 pm

Our fall protection course covers all the information required to receive a three year fall protection certification. This course is a blend of theoretical  and practical hands on training.  Participants learn about the  different pieces of equipment that make up a fall protection system, as well as the rules regarding when fall protection systems are required, what type to use, and how to avoid potential hazards. Students also learn how to do a proper fall calculation and figure out minimum clearances requirements to work safely from heights.

Course content:

  • Review of legislation (rules and regulations)
  • How to read and create a fall protection plan
  • Fall hazard identification, elimination and control
  • Identifying the types of anchor points and their proper set-up
  • Different connectors and how to use them
  • How to select, don, and doff a fall protection harness
  • Pre-use equipment inspections
  • Emergency response procedures

Duration
8 hours

Cost
$175.00

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

OSSA Fall Protection

admin Leave a Comment

  • October 9, 2014
    8:00 am - 4:30 pm

Our fall protection course covers all the information required to receive a three year fall protection certification. This course is a blend of theoretical  and practical hands on training.  Participants learn about the  different pieces of equipment that make up a fall protection system, as well as the rules regarding when fall protection systems are required, what type to use, and how to avoid potential hazards. Students also learn how to do a proper fall calculation and figure out minimum clearances requirements to work safely from heights.

Course content:

  • Review of legislation (rules and regulations)
  • How to read and create a fall protection plan
  • Fall hazard identification, elimination and control
  • Identifying the types of anchor points and their proper set-up
  • Different connectors and how to use them
  • How to select, don, and doff a fall protection harness
  • Pre-use equipment inspections
  • Emergency response procedures

Duration
8 hours

Cost
$175.00

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

OSSA Fall Protection

admin Leave a Comment

  • October 16, 2014
    8:00 am - 4:30 pm

Our fall protection course covers all the information required to receive a three year fall protection certification. This course is a blend of theoretical  and practical hands on training.  Participants learn about the  different pieces of equipment that make up a fall protection system, as well as the rules regarding when fall protection systems are required, what type to use, and how to avoid potential hazards. Students also learn how to do a proper fall calculation and figure out minimum clearances requirements to work safely from heights.

Course content:

  • Review of legislation (rules and regulations)
  • How to read and create a fall protection plan
  • Fall hazard identification, elimination and control
  • Identifying the types of anchor points and their proper set-up
  • Different connectors and how to use them
  • How to select, don, and doff a fall protection harness
  • Pre-use equipment inspections
  • Emergency response procedures

Duration
8 hours

Cost
$175.00

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

OSSA Fall Protection

admin Leave a Comment

  • October 23, 2014
    8:00 am - 4:30 pm

Our fall protection course covers all the information required to receive a three year fall protection certification. This course is a blend of theoretical  and practical hands on training.  Participants learn about the  different pieces of equipment that make up a fall protection system, as well as the rules regarding when fall protection systems are required, what type to use, and how to avoid potential hazards. Students also learn how to do a proper fall calculation and figure out minimum clearances requirements to work safely from heights.

Course content:

  • Review of legislation (rules and regulations)
  • How to read and create a fall protection plan
  • Fall hazard identification, elimination and control
  • Identifying the types of anchor points and their proper set-up
  • Different connectors and how to use them
  • How to select, don, and doff a fall protection harness
  • Pre-use equipment inspections
  • Emergency response procedures

Duration
8 hours

Cost
$175.00

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

OSSA Fall Protection

admin Leave a Comment

  • October 30, 2014
    8:00 am - 4:30 pm

Our fall protection course covers all the information required to receive a three year fall protection certification. This course is a blend of theoretical  and practical hands on training.  Participants learn about the  different pieces of equipment that make up a fall protection system, as well as the rules regarding when fall protection systems are required, what type to use, and how to avoid potential hazards. Students also learn how to do a proper fall calculation and figure out minimum clearances requirements to work safely from heights.

Course content:

  • Review of legislation (rules and regulations)
  • How to read and create a fall protection plan
  • Fall hazard identification, elimination and control
  • Identifying the types of anchor points and their proper set-up
  • Different connectors and how to use them
  • How to select, don, and doff a fall protection harness
  • Pre-use equipment inspections
  • Emergency response procedures

Duration
8 hours

Cost
$175.00

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

OSSA Fall Protection

admin Leave a Comment

  • July 3, 2014
    8:00 am - 4:30 pm

Our fall protection course covers all the information required to receive a three year fall protection certification. This course is a blend of theoretical  and practical hands on training.  Participants learn about the  different pieces of equipment that make up a fall protection system, as well as the rules regarding when fall protection systems are required, what type to use, and how to avoid potential hazards. Students also learn how to do a proper fall calculation and figure out minimum clearances requirements to work safely from heights.

Course content:

  • Review of legislation (rules and regulations)
  • How to read and create a fall protection plan
  • Fall hazard identification, elimination and control
  • Identifying the types of anchor points and their proper set-up
  • Different connectors and how to use them
  • How to select, don, and doff a fall protection harness
  • Pre-use equipment inspections
  • Emergency response procedures

Duration
8 hours

Cost
$175.00

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

OSSA Fall Protection

admin Leave a Comment

  • July 10, 2014
    8:00 am - 4:30 pm

Our fall protection course covers all the information required to receive a three year fall protection certification. This course is a blend of theoretical  and practical hands on training.  Participants learn about the  different pieces of equipment that make up a fall protection system, as well as the rules regarding when fall protection systems are required, what type to use, and how to avoid potential hazards. Students also learn how to do a proper fall calculation and figure out minimum clearances requirements to work safely from heights.

Course content:

  • Review of legislation (rules and regulations)
  • How to read and create a fall protection plan
  • Fall hazard identification, elimination and control
  • Identifying the types of anchor points and their proper set-up
  • Different connectors and how to use them
  • How to select, don, and doff a fall protection harness
  • Pre-use equipment inspections
  • Emergency response procedures

Duration
8 hours

Cost
$175.00

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

OSSA Fall Protection

admin Leave a Comment

  • July 17, 2014
    8:00 am - 4:30 pm

Our fall protection course covers all the information required to receive a three year fall protection certification. This course is a blend of theoretical  and practical hands on training.  Participants learn about the  different pieces of equipment that make up a fall protection system, as well as the rules regarding when fall protection systems are required, what type to use, and how to avoid potential hazards. Students also learn how to do a proper fall calculation and figure out minimum clearances requirements to work safely from heights.

Course content:

  • Review of legislation (rules and regulations)
  • How to read and create a fall protection plan
  • Fall hazard identification, elimination and control
  • Identifying the types of anchor points and their proper set-up
  • Different connectors and how to use them
  • How to select, don, and doff a fall protection harness
  • Pre-use equipment inspections
  • Emergency response procedures

Duration
8 hours

Cost
$175.00

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

OSSA Fall Protection

admin Leave a Comment

  • May 22, 2014
    8:30 am - 4:30 pm

Our fall protection course covers all the information required to receive a three year fall protection certification. This course is a blend of theoretical  and practical hands on training.  Participants learn about the  different pieces of equipment that make up a fall protection system, as well as the rules regarding when fall protection systems are required, what type to use, and how to avoid potential hazards. Students also learn how to do a proper fall calculation and figure out minimum clearances requirements to work safely from heights.

Course content:

  • Review of legislation (rules and regulations)
  • How to read and create a fall protection plan
  • Fall hazard identification, elimination and control
  • Identifying the types of anchor points and their proper set-up
  • Different connectors and how to use them
  • How to select, don, and doff a fall protection harness
  • Pre-use equipment inspections
  • Emergency response procedures

Duration
8 hours

Cost
$150.00

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

OSSA Fall Protection

admin Leave a Comment

  • May 29, 2014
    8:30 am - 4:30 pm

Our fall protection course covers all the information required to receive a three year fall protection certification. This course is a blend of theoretical  and practical hands on training.  Participants learn about the  different pieces of equipment that make up a fall protection system, as well as the rules regarding when fall protection systems are required, what type to use, and how to avoid potential hazards. Students also learn how to do a proper fall calculation and figure out minimum clearances requirements to work safely from heights.

Course content:

  • Review of legislation (rules and regulations)
  • How to read and create a fall protection plan
  • Fall hazard identification, elimination and control
  • Identifying the types of anchor points and their proper set-up
  • Different connectors and how to use them
  • How to select, don, and doff a fall protection harness
  • Pre-use equipment inspections
  • Emergency response procedures

Duration
8 hours

Cost
$165.00

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

OSSA Fall Protection

admin Leave a Comment

  • June 5, 2014
    8:30 am - 4:30 pm

Our fall protection course covers all the information required to receive a three year fall protection certification. This course is a blend of theoretical  and practical hands on training.  Participants learn about the  different pieces of equipment that make up a fall protection system, as well as the rules regarding when fall protection systems are required, what type to use, and how to avoid potential hazards. Students also learn how to do a proper fall calculation and figure out minimum clearances requirements to work safely from heights.

Course content:

  • Review of legislation (rules and regulations)
  • How to read and create a fall protection plan
  • Fall hazard identification, elimination and control
  • Identifying the types of anchor points and their proper set-up
  • Different connectors and how to use them
  • How to select, don, and doff a fall protection harness
  • Pre-use equipment inspections
  • Emergency response procedures

Duration
8 hours

Cost
$165.00

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

OSSA Fall Protection

admin Leave a Comment

  • June 12, 2014
    8:30 am - 4:30 pm

Our fall protection course covers all the information required to receive a three year fall protection certification. This course is a blend of theoretical  and practical hands on training.  Participants learn about the  different pieces of equipment that make up a fall protection system, as well as the rules regarding when fall protection systems are required, what type to use, and how to avoid potential hazards. Students also learn how to do a proper fall calculation and figure out minimum clearances requirements to work safely from heights.

Course content:

  • Review of legislation (rules and regulations)
  • How to read and create a fall protection plan
  • Fall hazard identification, elimination and control
  • Identifying the types of anchor points and their proper set-up
  • Different connectors and how to use them
  • How to select, don, and doff a fall protection harness
  • Pre-use equipment inspections
  • Emergency response procedures

Duration
8 hours

Cost
$165.00

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

OSSA Fall Protection

admin Leave a Comment

  • June 19, 2014
    8:30 am - 4:30 pm

Our fall protection course covers all the information required to receive a three year fall protection certification. This course is a blend of theoretical  and practical hands on training.  Participants learn about the  different pieces of equipment that make up a fall protection system, as well as the rules regarding when fall protection systems are required, what type to use, and how to avoid potential hazards. Students also learn how to do a proper fall calculation and figure out minimum clearances requirements to work safely from heights.

Course content:

  • Review of legislation (rules and regulations)
  • How to read and create a fall protection plan
  • Fall hazard identification, elimination and control
  • Identifying the types of anchor points and their proper set-up
  • Different connectors and how to use them
  • How to select, don, and doff a fall protection harness
  • Pre-use equipment inspections
  • Emergency response procedures

Duration
8 hours

Cost
$165.00

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *

OSSA Fall Protection

admin Leave a Comment

  • June 26, 2014
    8:30 am - 4:30 pm

Our fall protection course covers all the information required to receive a three year fall protection certification. This course is a blend of theoretical  and practical hands on training.  Participants learn about the  different pieces of equipment that make up a fall protection system, as well as the rules regarding when fall protection systems are required, what type to use, and how to avoid potential hazards. Students also learn how to do a proper fall calculation and figure out minimum clearances requirements to work safely from heights.

Course content:

  • Review of legislation (rules and regulations)
  • How to read and create a fall protection plan
  • Fall hazard identification, elimination and control
  • Identifying the types of anchor points and their proper set-up
  • Different connectors and how to use them
  • How to select, don, and doff a fall protection harness
  • Pre-use equipment inspections
  • Emergency response procedures

Duration
8 hours

Cost
$165.00

Venue:  

Venue Phone: 780.449.2700

Address:
8429 24 Street NW, Edmonton, Alberta, Canada, T6P 1L3

Leave a Reply

Your email address will not be published. Required fields are marked *